News

The function of the electronic water pump is to forcefully cool the oil at the turbine shaft after the engine is turned off. The electronic water pump combines the advantages of self-priming pumps and chemical pumps. It is synthesized from a variety of corrosion-resistant imported materials and has acid-resistant, alkali-resistant, corrosion-resistant and other properties. It has extremely fast self-priming speed (about 1 second) and strong suction force. The suction distance is up to 5 meters and basically noiseless. Exquisite workmanship, not only has self-priming function, but also has large flow rate (up to 25 liters per minute), high pressure (up to 2.7 kg), stable performance, and easy installation.

The working principle of the electronic water pump is as follows:

1. The circular motion of the motor makes the diaphragm inside the water pump reciprocate through a mechanical device, thereby compressing and stretching the air in the pump chamber (fixed volume);

2. Under the action of the one-way valve, a positive pressure is formed at the drain outlet (the actual output pressure is related to the boost received by the pump drain outlet and the characteristics of the pump);

3. A vacuum is formed at the water suction port, thereby creating a pressure difference with the outside atmospheric pressure. Under the action of pressure difference, water is forced into the water inlet and then discharged from the drain outlet;

4. Under the action of the kinetic energy transmitted by the motor, water is continuously inhaled and discharged, forming a relatively stable flow rate.